Herunterladen Diese Seite drucken

EFOY ProCube 2060A-3 Bedienungsanleitung Seite 38

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

You have chosen an EFOY energy solution from SFC Energy AG.
We hope you enjoy your new energy supply. If you have any questions about installation
and operation, please contact your sales partner or the EFOY hotline.
Copyright by SFC Energy AG 2023. All rights reserved.
Information is subject to change without notice. Revision 01/2023
Read the operating instructions before commissioning. For your own
safety, follow the instructions and warnings in these operating
instructions as well as the instructions in the enclosed operating
instructions for the components. Keep the operating instructions with
the EFOY energy solution.
The EFOY ProCube with built-in EFOY fuel cell is intended for operation
in a well-ventilated environment and requires sufficient and exhaust-
free supply air. The fuel cell must be protected from direct weather
influences, especially from moisture penetration. The EFOY ProCube
must be used in accordance with the IP protection class. The unit
generates exhaust gases which must be discharged into the open air.
Always ensure sufficient ventilation.
Do not open the EFOY fuel cell. Do not open fuel cartridges and do not
refill them.
Transport in an upright position only. Do not transport the EFOY
ProCube with the fuel cell, fuel cartridges and batteries installed.
Protect the EFOY fuel cell and fuel cartridges from heat and direct
sunlight. Observe the temperature specifications for operation and
storage according to the EFOY fuel cell operating instructions.
Store the EFOY fuel cell and EFOY ProCube frost-free. For frost
protection operation at temperatures below 3 °C, leave a filled fuel
cartridge and an intact battery connected.
Page 38

Werbung

loading