General Application Instructions - HBK C2 Montageanleitung

4

GENERAL APPLICATION INSTRUCTIONS

Force transducers are suitable for measuring compressive forces. They provide highly
accurate static and dynamic force measurements and must therefore be handled very
carefully. Particular care must be taken when transporting and installing the devices.
Dropping and knocking the transducer may cause permanent damage.
C2 series force transducers have a convex force application part, to which the forces to
be measured must be applied.
Chapter 11 "Specifications", starting on page 23, lists the permissible limits for mechani­
cal, thermal and electrical stress. It is essential to observe these limits when planning the
measuring set-up, during installation and, ultimately, during operation.
C2
10
GENERAL APPLICATION INSTRUCTIONS