Introduction; Device Description; Scope Of Delivery; Lntended Use - Scheppach DS920X Original Bedienungsanleitung

1.

Introduction

Manufacturer
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you much joy and success in working with
your new device.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations. The operating instructions
contain important information on how to operate the
machine safely, professionally and economically, how
to avoid danger, costly repairs, reduce downtimes and
how to increase reliability and service life of the ma-
chine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machine
and carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regulations
for the operation of identical devices must be com-
plied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.

2. Device description

1. Grinding plate
2. Front handle
3. Set Screw
4. LED light
5. Setting speed range
6. Locking knob
7. Main handle
8. Power cord
9. Additional handle
10. Connection for dust extractor
11. Telescopic extension
12. Lock for telescopic extension
13. ON/OFF switch
14. Flexible suction hose
15. Hose adaptor
16. Sanding paper
17. Allen key
18. Carbon brushes
19. Cotter pin
20. ON/OFF switch LED

3. Scope of delivery

1 Drywall sander
1 flexible suction hose (14)
6 abrasive sheets (16) (different grain sizes)
2 replacement carbon brushes (18)
1 Allen key (17)
1 Cotter pin (19)

4. lntended use

The intended use of this power tool is the sanding of
large areas of drywalls as a preparation before paint-
ing or wallpapering using suitable abrasive sheets.
www.scheppach.com GB | 21