Introduction; Starting Up / Recommended Procedure - HBM espressoDAQ DQ401 Kurzanleitung

4
1

Introduction

Please follow the safety instructions in the espressoDAQ operating ma-
nual.
This purpose of this quick start guide is to get one or more espressoDAQ mo-
dules quickly up and running.
Further, more detailed information is available in the:
− espressoDAQ operating manual (PDF document) on the accompanying Sy-
stem CD
This guide shows you:
• How to use the espressoDAQ module to connect up to 4 espressoDAQ
modules to a PC (via a USB HUB)
• How to start up the system
• The first steps to take with catman

1.1 Starting up / recommended procedure


1. Install catman
2. Connect the transducers
3. Connect the voltage supply and the PC
4. Configure / parameterize the transducers with catman
5. Start measurement
Starter

Starter and espressoDAQ
Introduction

Starter
A2887−2.0 en/de