Calibration On; Calibration Off; Calibration For Dl Probe; Prompt Sound - PCE Instruments PCE-2500 Bedienungsanleitung

Manual

7.12.3 Calibration on

In calibration menu, the current item is ""(Calibration On), press ► to switch on the Calibration and
return to the Menu screen. After Calibration is done, the symbol will display at upper of the
measuring screen.

7.12.4 Calibration off

If you want to switch off the calibration, in calibration menu, press ▲ to move to "X", then press ► to
switch off the Calibration function and return to the Menu screen.

7.12.5 Calibration for DL probe

For DL probe, you need to make calibration individually by same procedure like D probe.

7.13 Prompt Sound

Press ▼ to enter the Menu screen. Press ▼ or ▲ to select Sound and press ► to enter. Press ▼ or ▲ to
select X(Off) → (On).
Press ► to confirm after selection and return to the Menu screen, or press and hold any key to save and
return to the Measure screen.
17