Display Modes; Settings - PCE Instruments PCE-2500 Bedienungsanleitung

7.5

Display Modes

In measuring mode, press ▲ in turn to switch between different display modes.
7.6

Settings

Press ▼ to enter the Menu screen. Press ▼ or ▲ to select Settings and press ► to enter. Press ▼ or ▲
again to select in cycle: Exit → Default → Save as user → Load user.
Exit: Return to the Measure screen without modification. Press ► to return to the Menu screen, or press
and hold any key to save and return to the Measure screen.
Default: Restore factory settings.
Save as user settings: User can save the set parameters, such as the impact device, materials, mean
times, Upper/Lower Limit etc.
Load Settings: Load the saved user settings.
Press ► to return to the Menu screen, or press and hold any key to save and return to the Measure
screen.
Manual
13