Automatic Programmes; Using The Automatic Programmes; Using The Automatic Programme; Cakes - Privileg TC034B2U-S0EE Gebrauchsanleitung

Automatic programmes

You can prepare dishes with ease thanks to
the 10 automatic programme settings. You
simply select the programme and enter the
weight of the dish. Automatic mode does the
rest.
The grill rack can be used for the auto-
matic programmes A8, A9 and A10.
Before getting started
• Remove all packaging
• Weigh the food – its weight is needed to
ensure the correct settings.
Using the automatic
programmes
1. Place the container on the turntable (7) in
the cooking chamber.
2. Close the cooking chamber door (11).
3. Touch the > sensor (14) to select the auto-
matic programmes menu.
4. Touch the < and > sensors (14) until the
display (1) shows the required automatic
programme ( to
A1 A10
flash.
5. To confirm the selection, touch the
"START/+30Sec/Confirm" sensor (13).
The indicator stops flashing.
6. Use the < and > sensors (14) to set the
required weight.
7. To start defrosting,
"START/+30Sec/Confirm" sensor (13).
The appliance will start and the fan will
switch on. On the display (1), the
tomatic programme" indicator (29) will flash
and the cooking time indicator will begin to
count down.
When the countdown reaches
will be five beeps and the appliance will
). The indicator will
touch the
"Au-
, there
0: 0 0
Automatic programmes
switch off. The display (1) will show the
time again.
Using the automatic
programme "Cakes"
The "Cakes" automatic programme (
special as it works with a preheating function
and the cooking chamber door (11) must be
opened after preheating.
1. Touch the > sensor (14) to select the auto-
matic programmes menu.
2. Touch the < and > sensors (14) until the dis-
play (1) shows the automatic programme
. The indicator will flash.
A8
3. To confirm the selection and start preheat-
ing, touch the "START/+30Sec/Confirm"
sensor (13).
The "Convection mode" (25) and
"Automatic programme" (29) indicators
flash.
In the third line, the display (1) will show
a series of bars. These represent the se-
lected temperature. When all progress
bars (31) light up, the selected temperature
has been reached.
When the cooking chamber is hot enough,
you will hear two beeps and the tempera-
ture indicator will flash again.
4. Open the cooking chamber door (11), place
the food in the cooking chamber and close
the cooking chamber door (11) again.
5. To start cooking, touch the "START/+30Sec/
Confirm" sensor (13).
The appliance will start and the fan will
switch on. On the display, the
vection mode" (25) and
gramme" (29) indicators will flash and the
cooking time indicator will begin to count
down.
When the countdown reaches
will be five beeps and the appliance will
switch off. The display (1) will show the
time again.
Page EN-27
) is
A8
y "Con-
"Automatic pro-
, there
0: 0 0