Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Functions; Multistage Cooking; Timer - Privileg TC034B2U-S0EE Gebrauchsanleitung

Mikrowellen-einbaugerät mit heißluft und grill
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Additional functions

Multistage cooking

You can set two different cooking levels – e.g.
when you first wish to defrost a dish at a high
power and then finish the cooking at a lower
power.
The grill rack can't be used in the pure
microwave mode. It can be used in all
the other modes.
Example:
You want to defrost your food for 5 minutes
and then cook it for 7 minutes at 80 % micro-
wave power.
1. Place the container on the turntable (7) in
the cooking chamber.
2. Close the cooking chamber door (11).
3. Touch the
"Defrosting by time" sen-
sor (22).
will appear on the display (1).
dEF2
4. Use the < and > sensors (14) to set a de-
frost time of 5:00 minutes.
The display (1) will now show the set de-
frost time.
5. Touch the
"Microwave mode" sen-
sor (18) twice.
The
"Microwave mode" indicator (24)
appears in the display (1). On the line be-
low, the
indicator will flash the first
P100
time it is touched, and the
will flash the second time.
6. To confirm the power level, touch the
"START/+30Sec/Confirm" sensor (13).
The indicator stops flashing.
7. Use the < and > sensors (14) to set a cook-
ing time of 7:00 minutes.
The display (1) will show the set cooking
time.
8. To
start
defrosting,
"START/+30Sec/Confirm" sensor (13).
The appliance will start and the fan will
switch on. On the display, the
crowave mode" (24) and
mode" (27) indicators will flash and the
defrost time indicator will begin to count
down.
When the defrosting time has elapsed, a
beep will sound and the cooking process
will begin. The cooking time indicator will
begin to count down
When the countdown reaches
will be five beeps and the appliance will
switch off. The display (1) will show the
time again.

Timer

The timer can only be used when no cook-
ing process is running.
1. Touch the
A beep will sound and the display (1) will
show the
2. Use the < and > sensors (14) to set the
required time.
The display (1) will show the selected time
(
0: 0 5
3. To confirm the time and start the timer,
touch the "START/+30Sec/Confirm" sen-
sor (13).
The time indicator begins counting down.
When the countdown reaches
will be five beeps and the appliance will
indicator
P80
switch off. The display (1) will show the
time again.
A beep will sound. The clock time will reap-
pear on the display (1), and the appliance
will be fully functional again.
touch
the
"Mi-
"Defrost
Additional functions
When the countdown timer is running,
all other appliance functions are disa-
bled.
"Timer" sensor (21).
indicator.
00: 0 0
to
).
95: 0 0
To end the timer early, touch the
"Stop/Pause" sensor (15).
Page EN-29
, there
0: 0 0
, there
0: 0 0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis