Herunterladen Inhalt Inhalt Diese Seite drucken

Service And Customer Care - Kenwood KAH65.000PL Bedienungsanleitungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
without the dicing grid fitted will
result in damage to the bottom of
the pusher.
To avoid injury keep hands away
from the blade when selecting the
slicing thickness.
Hints and Tips
For best results, use fresh fruit and
vegetables.
To prevent the food from jamming
do not pack the food tightly in the
feed tube – ideally the food should
be cut no larger than:
50 × 30mm
If the food is too hard to push
through the grid, cook for
approximately 10-15 minutes, then
allow to cool in a refrigerator before
processing.
Always remove hard skins, stones,
pips and seeds etc., from food
before processing.
Note:
Due to the various sizes and shapes
of foods, the diced results will
contain some misshapen pieces, this
is normal.
Foods such as cheese, ham, and
chorizo will clog in the grid so are
not recommended for use with this
attachment.
The Dicing Attachment can also be used
to produce French fries, crudités and
batons. (refer to illustration O)
Select the slice thickness by turning
the dial from 1 (extra thin) to 5 (extra
thick).
Important: to avoid injury keep hands
away from the blade when selecting
the slicing thickness.
1
Fit the dicing grid without the
adjustable disc.
2
Then manually push the food
through the grid without switching
the appliance on.
Note: The food processor
attachment must be assembled
on your Stand Mixer when making
crudités and French Fries.
To Dismantle Your
Attachment
Refer to Illustrations
Storage bag
Refer to Illustration
Store your discs and dicing
attachment in the storage bag.
Always ensure that the adjustable
slicing disc is turned to the storage
positon (O) before placing in the bag
or other storage location.
For safety reasons the knife blade
should be stored in the food
processor bowl instead of the
storage bag when not in use.
Service and Customer
Care
For Service and Customer Care
information refer to your main
Stand Mixer manual or visit
www.kenwoodworld.com.
Designed and engineered by Kenwood
in the UK.
Made in China.
5
R
T
(if supplied)
U

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis