Troubleshooting Guide - Kenwood KAH65.000PL Bedienungsanleitungen

Troubleshooting Guide

Problem
The food
processor
attachment will
not start/does not
operate.
Food processor
attachment
stopped during
operation.
Poor processing
performance
Ingredients leaking
from the lid.
Food Processor
Attachment/Stand
Mixer unstable.
Cause
No power to the Stand
Mixer.
Food processor attachment
not locked to the Stand
Mixer high speed outlet
correctly.
Food processor attachment
bowl not locked onto the
connector correctly or lid
not locked properly on the
bowl.
Food processor attachment
overloaded/ quantity of
ingredients added are above
the working capacity.
Excessive or insufficient
ingredients used.
Incorrect processing speed
or timings used.
Liquid ingredients have been
used.
Bowl has been over filled.
Sticky fruit/ingredients such
as dates being processed.
Speed selected too slow
Solution
Check the Stand Mixer is
plugged in and is switched on (if
applicable).
Check that all parts of the food
processor attachment are fitted
correctly.
Unplug the Stand Mixer. Unlock
the lid, remove the knife blade/
disc, and remove some ingredients
from the bowl. You should not
exceed the max working capacity.
Refer to the recommended
usage chart for recommended
processing quantity's, speeds, and
timings.
Do not use liquid ingredients, there
is a blender attachment available
to purchase for this purpose.
Unplug the Stand Mixer, unlock the
lid, and remove some ingredients
from the attachment. You should
not exceed the max limit.
For best results use 'Pulse' first to
break down the ingredients and
then continue processing on
speed 5.
6