English - Kenwood KAH65.000PL Bedienungsanleitungen

Safety
Read these instructions carefully and retain for future reference.
Before using for the first time, remove all packaging and any labels,
including plastic blade covers. Wash the parts: see 'Cleaning'.
The blades and cutting discs are very sharp, handle with care. Always hold
by the finger grip at the top, away from the cutting edge, both when
handling and cleaning.
Always ensure that the adjustable slicing disc is returned to the storage
position (O) when not in use.
Always remove the knife blade before pouring contents from the bowl.
Keep hands and utensils out of the bowl whilst the Stand Mixer is
connected to the power supply.
Never use your fingers to push food down the feed tube. Only use the
pushers supplied with the attachment.
Switch off and unplug:
before fitting or removing parts
after use
before cleaning
Never remove the lid from the attachment until the blade or cutting disc
has completely stopped.
When using the slicing, grating or julienne disc, do not let the bowl fill up
as far as the cutting disc: empty it regularly.
When using the knife blade do not fill above the Max level marked on the
bowl.
Do not touch moving parts.
Do not use excessive force to push food down the feed tube - you could
damage the attachment.
Do not chop ice cubes or other hard foods, such as spices, they may
damage the attachment.
Do not process frozen foods.
Do not use the knife blade to mix heavy loads such as bread dough
otherwise you may damage your attachment or machine. Use the dough
hook in the Stand Mixer.
Never process hot ingredients in the bowl, allow to cool to room
temperature before processing.
Do not pour hot liquids down the feed tube.
Do not blend liquid ingredients as they may leak from around the lid. A
blender is available for this purpose.
Do not use the lid to operate the food processor, always use the on/off or
speed control.
Misuse of your food processor attachment can result in injury.
Should excessive vibration occur when using this attachment, either reduce
the speed or stop the machine and remove the contents.
Never use a damaged attachment. Get it checked or repaired. See
'Service and customer care'.
Never use an unauthorised attachment or more than one attachment at
once.
Turn the speed control to 'O' OFF position and unplug before fitting or
removing tools/attachments, after use and before cleaning.
2