Vortice VORT PROMETEO PLUS HR 400 MP Betriebsanleitung Seite 10

ENGLISH
17A 17A
17B 17B
Control unit
(fig.18)
18 18
18
The following functions can be operated from the control
unit connected to the appliance:
- ON/OFF button;
- three speed selector switch: V min , V med , V max
The control unit contains a 2A fuse wired in series with
the power supply cable.
10
Radio module
(fig.19)
19 19
> 10 mm
Using the connected radio module (not supplied), it is
possible to control the appliance with the remote control
> 10 mm
unit during set-up.
Remote Control
(fig.20)
20 20
Using the remote control unit (not supplied), the
appliance minimum and maximum speeds can be set
during the initial configuration procedure.
The remote control can also be used to set the indoor
cut-in temperature; when this value is exceeded the
bypass valve will be activated.
Note: the remote control and radio module can only be
used during configuration and must be removed after this
to restore normal operation.
Note: the remote control-module radio set does not
convert the device into a remote-controlled version for
the user.
CO2(ppm) RH(%)
AUTO
°C
BP
Mo Tu We Th Fr Sa Su
F
DISPLAY TIMER MODE
SET NEXT ENTER