Efficient Use In Terms Of Energy Saving; Replacement Of Lamp - Grundig GDSP2470BSCH Bedienungsanleitung

3
Operation of the appliance
3.4 Efficient use in terms of
energy saving
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) and boost mode for intense
odour and vapour.
• The hood is equipped with lamps in order to illu-
minate the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.5 Operation of the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (2,3,4)
• You can illuminate the cooking area by pressing
the lamp (13).

3.6 Replacement of Lamp

MAX 3 W
Make the electrical connections of the appliance.
Your appliance uses 3W spot LED lamp. For rep-
Cooker Hood / User Manual
lacing the lamps, push downwards on the holder
from its behind, turn it counter-clockwise, and take
it out downwards. Apply the above operation in re-
verse to install new lamps.
Bulb
Bulb power
Holder/Socket
Bulb voltage
Size
ILCOS Code
Luminous flux
Correlated colour
temperature
This product contains a light source of energy ef-
ficiency class "F".
3.7 Operation with flue
connection
•
Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
• The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
3 W
GZ 10
220 - 240 V
53x50 mm
DR/F3-220-240-
GZ10-50-53
260 lm
3000 K
13 / EN