Operation Of The Appliance; Energy Efficient Usage - Grundig GDT 2561 X Bedienungsanleitung

3

Operation of the appliance

3.1 Controlling the appliance
A B
A
Press this button to turn on the appliance, the
product will operate at speed level 1, when
this button is pressed.
B
The product will operate at speed level 2,
when this button is pressed.
C By exploring the display, you may follow which
speed the product operates at on it.
D
The product will operate at booster level,
when this button is pressed.
E
Press this button to switch the lamp on and
off.
By pressing and holding any engine
operating button for more than 2
C
seconds, a 15 minutes timer func-
tion will be initiated. A signal will be
displayed as soon as the chronome-
ter starts, and the engine will auto-
matically stop after 15 minutes.

3.2 Energy efficient usage

• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1, 2) under normal conditions,
and ( ) for intense odour and va-
booster level
pour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
Cooker Hood / User Manual
C D E
3.3 Operation of the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (A, B, D)
• You can illuminate the cooking area by pressing
the lamp (E).
3.4 Cleaning time for the metal filter
Filters must be cleaned when the signal "c" is dis-
played on the screen or (depending on the use)
after 3 or 4 weeks. In order to clear the "c" signal,
after the filters have been cleaned and replaced,
press and hold the button (A) for more than 3 sec-
onds (when the device is turned off). the letter "e"
will appear on the screen, and the appliance will
operate normally. if operations are necessary be-
fore clearing the letter "c", then the active engine
speed will appear for 1 second when you press
the (A) button and then the engine will resume
functioning.
C
The "c" symbol will be displayed af-
ter 60 hours of functioning.
9 / EN