Grundig GDSP2470BSCH Bedienungsanleitung Seite 12

3
Operation of the appliance
3.2 Homewhiz setup and user
account settings
Follow the steps below to check and track your
hood from your mobile phone or tablet. You need
to connect your mobile phone to your home net-
work and download the HomeWhiz app from your
smartphone's app store to your tablet/mobile pho-
ne.
1. Open the HomeWhiz mobile app that you
downloaded to your mobile phone/tablet.
2. In the HomeWhiz app, tap the "Add Product" sec-
tion, select the hood from "Kitchen Appliances".
3. Advance the setup by following the on-screen
instructions.
4. Press the wireless button for 3 seconds, the wi-
reless icon should start flashing slowly.
5. Make sure that the location and bluetooth are
turned on, the necessary permissions are gran-
ted, so that your mobile phone will automatically
connect to the hood at the step of connecting
to the device.
6. In the next step, connect the product to your
home's local network. Open the local network
list from your phone and select the local network
you want to connect to and enter its password.
When connecting to the local area network is
complete, the wireless network icon must be
light up continuously.
7. After moving to the last step and naming your
hood, you can go back to the homepage. You
can select the product from the Devices page
and start using it.
You can see the products paired
with your account by touching the
C
"Appliances" page in the application.
You can delete the product from your
account by pressing and holding the
product on this page.
12 / EN
• When you press and hold the Wire-
less icon for 3 seconds, the wire-
less network icon starts flashing. If
HomeWhiz setup is not completed
in 5 minutes, the wireless network
is turned off and the wireless net-
C
work icon light goes off.
• During the HomeWhiz setup stage,
your mobile phone/tablet must be
connected to the wireless network
to which you want to connect the
hood before the setup and it sho-
uld stay connected until the setup
is complete.
3.3 HomeWhiz operation
If the hood is installed in your HomeWhiz acco-
unt, just pressing the wireless network icon 1 time
is enough to start the HomeWhiz control. It starts
flashing when you press the wireless network icon
1 time and it tries to connect to your local network
automatically. Since the hood was already connec-
ted to your local network in advance, it connects to
local network of your home quickly, and the wire-
less network icon goes into a continuous flashing
state and remains stable.
• To control your hood with HomeW-
hiz, the local network you previo-
usly connected the hood must be
active and the Internet speed sho-
uld be good. Your mobile phone/
tablet must be connected to the
Internet.
C
• You can also control the product
with both HomeWhiz and the
screen of the hood while your Ho-
meWhiz connection is active.
• In the event of a power outage or
an Internet outage on the local net-
work to which the hood is connec-
ted, the device becomes disabled
in your HomeWhiz app.
Cooker Hood / User Manual