ZAPTEC Go Installationsanleitung Seite 14

English
7. Confirm status indicator
Configuration is complete when the circular
light (status indicator) changes from green
to white.
8. Mount the front cover
9. That's it!
If you have followed all the steps so far, then the Zaptec Go should be configured
and online. Make sure you hand over the User Manual to the owner of the charger.
! Remind the owner that they should create a Zaptec App account to activate
and connect to the Zaptec Go charger.
14
Secure and lock the front cover
(max torque 1 Nm).
C