Installation; Power Connection; Switching On The Radio - Imperial DABMAN d30 Stereo Bedienhandbuch

6. INSTALLATION

Please take care when removing the parts from the packaging. Check
that all parts have been supplied.
Note: The radio can be controlled by using either the device buttons or
the remote control.

6.1. Power Connection

First, connect the included power supply unit to the corresponding port
on the back of the DABMAN d30 Stereo. Now, plug the power supply
E
unit into a 230V mains socket. Then connect the supplied telescopic
antenna to the antenna connector and pull the telescopic antenna onto
the radio back to full length, this ensures the best possible reception.

6.2 Switching on the radio

Press Standby/MENU button.
UP
1 2 3
PRESET
VOL+
DOWN
STANDBY SCAN
OK
MODE
VOL-
INFO
MENU
The device will switch on.
66
Operating Manual