Technical Data; Rating Plate - Electrolux DMGL8322UO Benutzerinformation

26 www.electrolux.com
Problem
The steam produced
during cooking is not suf‐
ficiently absorbed by the
hood.
and a number come
on.
10.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

11. TECHNICAL DATA

11.1 Rating plate

Model DMGL8322UO
Typ 66 D4A 01 AA
Induction 7.35 kW
Ser.Nr. .................
ELECTROLUX
Possible cause
The lids on the cookware
are not properly placed.
The hood filter is oversatu‐
rated.
There is an error in the
hob.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 599 245 00
220 - 240 V / 400 V 2N, 50 Hz
Made in: Germany
7.35 kW
Remedy
If your cookware does not
have vented lids, make sure
to tilt the lids so that the re‐
leased steam is directed to‐
wards the hood.
Refer to "Hints and Tips" for
information on the special
Steam Vented Lids recom‐
mended to be used with the
integrated hood.
Clean the hood filter and re‐
set the notification.Regener‐
ate the hood filter and reset
the notification. Refer to
"Care and cleaning".
Deactivate the hob and acti‐
vate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin‐
ues, speak to an Authorised
Service Centre.