Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.8 - FACTORY RESET
You must push the button on HMI board shown in figure-24 for factory reset. When you
hold the button for 5 seconds user configuration will be reset to factory configuration. (e.g
OCPP config, Network Config will be back to factory configuration.)
2.9 - OPEN RCD COVER
1
You may access the residual current device by openin the lock which is placed on the side cover
as shown in the figure 25. Place and push triangle key on the side cover lock then rotate the key
90 degree counter-clockwise.
IG v7.3.0 2021
Figure-24
2
Figure-25
© 2021 Vestel - All rights reserved
SW4
3
English - 31
Werbung
Inhaltsverzeichnis
