VESTEL EVC04-Serie Installationsanleitung Seite 41

4.5.3 NETWORK INTERFACES SETTINGS
There are three types of network interfaces in this page; Cellular, Ethernet and Wi-Fi.
However, only existing modems' interfaces could be seen in this page. For example, if there is no
cellular modem in your EV charger, you cannot see cellular section like below picture.
If your charging station has Wi-Fi and Cellular options together and if you enable cellular connection,
Wi-Fi connection will be disabled automatically even it was enabled and configured before. Similarly,
if you enable Wi-Fi connection, cellular connection will be disabled.
If you set Cellular as enabled, "APN Name" is mandatory.
Select interfaces' modes as "Enabled" if you want to activate it.
If you select Ethernet or Wi-Fi IP Settings as "Static", "IP Address", "Network Mask", Default
Gateway" and "Primary DNS" spaces are mandatory.
If you set Wi-Fi as enabled, "SSID", "Password" and "Security" are mandatory.
You should fill all spaces in suitable formats.
When you finish it, click "Save" button.
CELLULAR TO Wi-Fi
Wi-Fi TO CELLULAR
IG v7.3.0 2021
Figure.36
Figure.37
© 2021 Vestel - All rights reserved English - 40