VESTEL EVC04-Serie Installationsanleitung Seite 40

4.5.2 OCPP SETTINGS
Select OCPP connection mode.
If you select mode as "Enabled"; you should type all fields in the connection settings and
configuration parameters sections as shown below.
For now, the only available OCPP version is OCPP 1.6, so it will be selected as default.
You can set OCPP configuration parameters to their default values by clicking "Set to Defaults"
button.
Then, click "Save" button.
IG v7.3.0 2021
Figure.34
Figure.35
© 2021 Vestel - All rights reserved English - 39