Assembly Instructions - Fuel EC 600 Benutzerhandbuch

ASSEMBLY INSTRUCTIONS

Step 1:
1. Feed the computer cable (39) through the console mast (12) from below and then fix the console
mast (12) to the mounting plate on the main frame with 4 screws (109), 4 spring washers (136)
and 4 washers (133) using the Allen wrench (148).
2. Connect computer cable (39), handpulse cables (41) and handle wires (44 & 45) to console (38).
Fix the console (38) on the console mounting plate with 4 screws (111) - be careful not to
damage the cables!
3. Place left and right Lower Handlebars (10 & 11) onto left side and right side of console mast
shafts and secure with screws (99) and flat washers (132) with the help of the wrench (146).
35