Fill Recesses - invicon StoneLux 2.0 Gebrauchsinformation

3. Fill recesses

1. Place the application cannula on the StoneLux
®
Note: Only the StoneLux 2.0 filler syringe, 3ml, is available in the StoneLux
2. Place the StoneLux ®
2.0 filler 30ml cartridge on the hand applicator and tighten to the right.
3. Carefully squeeze out the StoneLux
to approx. 1-2mm below the top of the damage.
4. Carefully cover the filled-in damaged area with StoneLux
5. Carefully position the blue:tron
Then turn the light on for 15 seconds.
Note: The blue:tron ® lighting unit has a safety distance
and only comes on when this distance is observed.
Alternatively:
Carefully place the red blue:tron
lock the LED lighting head of the blue:tron
the glare shield. Then turn the light on for 60 seconds.
Note: For larger damaged areas, move the lighting unit slowly over the damaged area.
Warning: only use the blue:tron
® 2.0 filler cartridge, 30ml or 3ml and tighten.
® 2.0 filler material with the applicator and fill the damaged area up
®
® lighting unit with the LED lighting head on the transparent film.
® glare shield over the damaged area and carefully
® lighting unit into the upper opening of
® when wearing safety goggles.
®
2.0 compacc system.
2.0 transparent film.
More WOW
for your repairs!
invicon StoneLux® 2.0 | 9