invicon StoneLux 2.0 Gebrauchsinformation Seite 16

b) Application as a thinner:
1. Place the application cannula on a suitable StoneLux ®
2.0 repair syringe and tighten.
2. Apply the material to the transparent mixing plate, mix in 1-2 drops of sealer to thin the material and compare with the original
colour of the repair surface.
3. Apply the mixed individual StoneLux ® 2.0 colour with the spatula side of the application instrument over the entire surface
4. Cover the filled-in damaged area with StoneLux ® 2.0 transparent film. (Do not press on!)
5. Carefully position the blue:tron ®
lighting unit with the LED lighting head on the transparent film. Then turn the light on for 15 seconds.
®
Note: The blue:tron lighting unit has a safety distance and only comes on when this distance is observed.
Alternatively:
Carefully place the red blue:tron ® glare shield over the damaged area and carefully lock the LED lighting head of the blue:tron
®
lighting unit into the upper opening of the glare shield. Then turn the light on for 60 seconds.
Note: For larger damaged areas, move the lighting unit slowly over the damaged area.
Warning: only use the blue:tron ® when wearing safety goggles
Next step 4.6. Finish the repair, page 17
16 | invicon StoneLux® 2.0