Repair Using The Micro Defect Technique - invicon StoneLux 2.0 Gebrauchsinformation

®
Note: The blue:tron lighting unit has a safety distance and only comes on when this distance is observed.
Note: For larger damaged areas, move the lighting unit slowly over the damaged area.
Warning: only use the blue:tron
12. Carefully remove the negative stamp from the surface.
13. If necessary, rework with Proxxon tool and suitable diamond tool.
Warning: No longer sand or polish, otherwise the structure will be destroyed again.

4.5. Repair using the micro defect technique

a) Direct application as a sealer:
1. Drip StoneLux ®
2.0 sealer into the damaged area without additional mixed repair paste (transpa)
Note: Work flat, do not overfill
2. Cover the filled-in damaged area with StoneLux
3. Carefully position the blue:tron
Note: The blue:tron ® lighting unit has a safety distance and only comes on when this distance is observed.
Alternatively:
Carefully place the red blue:tron
blue:tron ® lighting unit into the upper opening of the glare shield. Then turn the light on for 60 seconds.
Note: For larger damaged areas, move the lighting unit slowly over the damaged area.
Warning:
only use the blue:tron
Next step 4.6. Finish the repair, page 17
® when wearing safety goggles.
® 2.0 transparent film. (Do not press on!)
® lighting unit with the LED lighting head on the transparent film. Then turn the light on for 15 seconds.
® glare shield over the damaged area and carefully lock the LED lighting head of the
®
when wearing safety goggles.
invicon StoneLux® 2.0 | 15