invicon StoneLux 2.0 Gebrauchsinformation Seite 13

3. Apply the mixed individual StoneLux
Note: Overfill slightly.
Warning: Light curing materials like StoneLux
exposure process. To achieve the desired thickness, it may be necessary to apply several layers of material and systematically
cure each of them. A maximum coat thickness of 0.2mm is recommended.
Note: It is not necessary to apply primer between the individual StoneLux
4. Carefully position the blue:tron
Then turn the light on for 15 seconds.
Note: The blue:tron ® lighting unit has a safety distance and only comes on when this distance is observed.
Alternatively: Carefully place the red blue:tron
the blue:tron ® lighting unit into the upper opening of the glare shield. Then turn the light on for 60 seconds.
Note: For larger damaged areas, move the lighting unit slowly over the damaged area.
Warning: only use the blue:tron
5. Cover the completely filled damaged area with StoneLux
Next step 4.6. Finish the repair, page 17
® 2.0 colour over the entire surface with the spatula side of the application instrument.
® 2.0 black, brown, red and yellow cure to different depths after one
® lighting unit with the LED lighting head on the transparent film.
® glare shield over the damaged area and carefully lock the LED lighting head of
® when wearing safety goggles.
®
New performance
® 2.0 coats.
2.0 transparent film. (Do not press on!)
for premium repairs!
invicon StoneLux® 2.0 | 13