How To Operate Memory Cooking; Using The Double Quantity Button - Samsung MJ26A6013 Betriebsanleitung

HOW TO OPERATE MEMORY COOKING

After having finished memory programming, just press the NUMBER pad
of the memory number you want to select. The oven will automatically start
heating according to the pre-programmed cooking time and power level.
1. Make sure the oven is plugged into a properly earthed electrical outlet.
2. Open the door.The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of the oven
and then close the door securely.
Result : The oven lamp will go off.
4. Press NUMBER pad.
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 19 MJ26A6013AT_EU_DE68-02570E-00_EN.indd 19

USING THE DOUBLE QUANTITY BUTTON

1. Hold down and then press ( ) pad.
CANCEL( )
Hold together for 2 seconds.
2. Select desired program code by using NUMBER
pads.
3. Press NUMBER pads to set the magnification
factor within the range from 1.00 to 9.99.
Default factor is 2.00 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for
each memory code number.
4. Press the Start ( ) button.
Press CANCEL( ) pad to exit the programming
mode.Though you can successfully set a double
quantity factor whose setting might result in
excess of the maximum time allowed for each power level, the oven
does not operate exceeding the maximum time.
19
24/5/2021 11:18:55 AM 24/5/2021 11:18:55 AM