Double Quantity Pad Programming; How To Operate Double Quantity Pad; Programming Air Filter Clean Time - Samsung MJ26A6013 Betriebsanleitung

DOUBLE QUANTITY PAD PROGRAMMING

Double Quantity Factor Editing
Feature Key Entry
Hold down ( ) and
then ( ) pad
Code No.
(Input desired factor
value.)
Double
START( )
Quantity
Factor
Edit
New Code No.
(Input factor value)
START( )
CANCEL( )
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 20 MJ26A6013AT_EU_DE68-02570E-00_EN.indd 20
Display Remark
Hold down for 2 sec.
After 1 sec, default value
shows in the display
window.
1.00 ~ 9.99 available
(Change the factor if
required.)
If you don't want to
change more, press
CANCEL to exit the
editing mode.
Skip this step if not
necessary.
Skip this step if not
necessary.
Skip this step if not
necessary.
This exits the editing
(Mode cancel)
mode.

HOW TO OPERATE DOUBLE QUANTITY PAD

1. Press the Double Quantity pad.
2. Press the desired memory NUMBER pad.
Result : Cooking time which was multiplied
by the preset factor appears in the
display and cooking starts with time
digits counting down.

PROGRAMMING AIR FILTER CLEAN TIME

1. Hold down PROGRAM LOCK and then press NUMBER 3 pad. Hold
together for 2 seconds.
Result : The display will show the length of time in hours between
cleaning the air filter you have
programmed in or the original time
preset by the manufacturer.
Default clean time is 500 hours in terms of pure
oscillating time, not the continuity time.
2. Press NUMBER pads to set the desired clean
time.
You can set up to 999 hours.
20
24/5/2021 11:18:56 AM 24/5/2021 11:18:56 AM