Controlling Beep Tone; Information Codes - Samsung MJ26A6013 Betriebsanleitung

3. Hold down PROGRAM LOCK and then press
PROGRAM pad. Hold together for 2 seconds in
order to save the new value. This completes the
programming of the air filter clean time.
4. Press CANCEL( ) pad to return to cooking
mode.
After the clean time has expired, you should clean
the air filter. See page 23.

CONTROLLING BEEP TONE

You can select the beep tone you require. There are 4 sound levels
available.
1. Hold down CANCEL( ) and then press
NUMBER 0 pad. Hold together for 2 seconds.
Result :
Beep tone is changed to one level
higher than current one.
Settings are circulating whenever you press the
hidden keys in the following order.
Snd 0 -> Snd 1 -> Snd 2 -> Snd 3 -> Snd 0 (No
sound)
Default tone is Snd 2.
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 21 MJ26A6013AT_EU_DE68-02570E-00_EN.indd 21

INFORMATION CODES

Error Error
Code
Items Beep
Power Power
frequency frequency is
E1 -
Error other than 50
(50/60Hz) Hz.
Memory IC
(EEPROM IC)
is not working
correctly.In this
One long case, other
EEPROM
E5 beep for features except
Error
2 sec for memory
function work
properly. (You
can operate the
oven manually)
21
Cause Remedy
Unplug the power cord
plug and check if the
power frequency is 50
Hz.Plug the power cord in
50 Hz power source and
see If "E1" appears. If the
error code is displayed
again even after the
correct power source
is provided, contact the
nearest service centre.
Press CANCEL pad one
or more times and try to
start a memory heating.
If the error code "E5"
persists, contact your
nearest service centre.
24/5/2021 11:18:56 AM 24/5/2021 11:18:56 AM