How To Operate Memory Cooking; How To Operate Double Quantity Button; Double Quantity Button Programming - Samsung CM1929A Bedienungsanleitung

HOW TO OPERATE MEMORY COOKING

After having finished memory programming, just press the NUMBER buttons of the
memory number you want to select. The oven will automatically start heating according
to the pre-programmed cooking time and power level.
1. Make sure the oven is plugged into a properly earthed
electrical outlet and "ON" appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre
of the oven and then close the door securely.
Result :
The oven lamp will go off.
4. Press NUMBER buttons.
Result : The selected memory program automatically
starts heating. But, NUMBER buttons 1, 2, 3
operate after 2 seconds.

HOW TO OPERATE DOUBLE QUANTITY BUTTON

1. Press the DOUBLE QUANTITY button.
2. Press the desired memory NUMBER buttons.
Result : Cooking time which was multiplied by the preset
factor appears in the display and cooking starts
with time digits counting down.
You don't need to press the START button to start heating.
CM1529A-1_XEU_DE68-04030B-02_EN_140114.indd 19

DOUBLE QUANTITY BUTTON PROGRAMMING

1. Hold down CANCEL button and then press the DOUBLE
QUANTITY button. Hold together for 2 seconds.
2. Select desired program code by using NUMBER buttons.
3. Press NUMBER buttons to set the magnification factor
within the range from 1.00 to 9.99.
4. Press the START button.
Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each memory
code number.
Press button to exit the programming mode.
Though you can successfully set a double quantity factor whose setting might result
in excess of the maximum time allowed for each power level, the oven does not
operate exceeding the maximum time.
English - 19