How To Operate Memory Cooking; How To Operate Double Quantity Pad; Double Quantity Pad Programming - Samsung CM1929A Bedienungsanleitung Mit Zubereitungshinweisen

HOW TO OPERATE MEMORY COOKING

After having finished memory programming, just press the NUMBER pad
of the memory number you want to select. The oven will automatically start
heating according to the pre-programmed cooking time and power level.
1. Make sure the oven is plugged into a properly earthed electrical outlet
and "ON" appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of the oven
and then close the door securely.
Result :
The oven lamp will go off.
4. Press NUMBER pad.
Result : The selected memory program
automatically starts heating. But,
NUMBER pad 1, 2, 3 operate after 2
seconds.

HOW TO OPERATE DOUBLE QUANTITY PAD

1. Press the Double Quantity pad.
2. Press the desired memory NUMBER pad.
Result : Cooking time which was multiplied
by the preset factor appears in the
display and cooking starts with time
digits counting down.
You don't need to press ( ) button to start heating.
CM1529A_XEU_04030B_EN.indd 13

DOUBLE QUANTITY PAD PROGRAMMING

1. Hold down ( ) and then press (
together for 2 seconds.
2. Select desired program code by using NUMBER
pads.
3. Press NUMBER pads to set the magnification
factor within the range from 1.00 to 9.99.
Default factor is 1.65 preset from the manufacturer
for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each
memory code number.
4. Press ( ) button.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting
might result in excess of the maximum time allowed for each power
level, the oven does not operate exceeding the maximum time.
13
) pad. Hold
2011-07-13 9:39:09