Herunterladen Inhalt Inhalt Diese Seite drucken

Installing Your Microwave Oven; Cleaning Your Microwave Oven - Samsung MJ26A6013 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33

INSTALLING YOUR MICROWAVE OVEN

Place the oven on a flat level
surface 85 cm above the floor.
The surface should be strong
enough to safety bear the weight
of the oven.
1. When you install your oven, make sure there
is adequate ventilation for your oven by
leaving at least 10 cm (4 inches) of space
behind and, on the sides of the oven and 20
cm (8 inches) of space above.
2. Remove all packing materials inside the oven.
3. Install the roller ring and turntable. Check
that the turntable rotates freely.
(Turntable type model only)
4. This microwave oven has to be positioned
so that plug is accessible.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
For your personal safety, plug the cable
into a proper AC earthed socket.
Do not install the microwave oven in hot or
damp surroundings like next to a traditional
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 7
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 7
oven or radiator. The power supply
specifications of the oven must be respected
10 cm
10 cm
20 cm
20 cm
and any extension cable used must be
behind
behind
above
above
of the same standard as the power cable
85 cm of
85 cm of
10 cm on
10 cm on
supplied with the oven. Wipe the interior and
the floor
the floor
the side
the side
the door seal with a damp cloth before using
your microwave oven for the first time.

CLEANING YOUR MICROWAVE OVEN

The following parts of your microwave oven
should be cleaned regularly to prevent
grease and food particles from building up:
• Inside and outside surfaces
• Door and door seals
• Turntable and Roller rings
(Turntable type model only)
ALWAYS ensure that the door seals are
clean and the door closes properly.
Failure to maintain the oven in a clean
condition could lead to deterioration of the
surface that could adversely affect the life
of the appliance and possibly result in a
hazardous situation.
1. Clean the outside surfaces with a soft cloth
and warm, soapy water. Rinse and dry.
7
24/5/2021 11:18:51 AM
24/5/2021 11:18:51 AM

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis