Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Time; Cooking/Reheating - Samsung MJ26A6013 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33

SETTING THE TIME

Your microwave oven has an inbuilt clock. When power is supplied, ":0",
"88:88" or "12:00" is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-
hour or 12-hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer
and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of
setting or operating with temporary stop condition, function is canceled
and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
1. To display the time in the...
24-hour notation
12-hour notation
2. Use NUMBER PADS buttons to enter the current
time. You must press at least three numbers to set
the clock. If the current time is 5:00 enter, 5,0,0.
3. When the right time is displayed, press the START
BUTTON to start the clock. The clock sets by itself
within 10 seconds.
If you don't want to setting the time, press the CANCEL PAD before
starting your cooking.
If you want to change or reset the time setting , Plug your oven again.
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 13
MJ26A6013AT_EU_DE68-02570E-00_EN.indd 13
Then press '+20s'
2
Once
Twice

COOKING/REHEATING

One Stage Cooking
This oven is preset at the factory for automatic operation.
Make sure the oven is plugged into a properly earthed electrical outlet.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven
and then close the door securely (The oven lamp will go off.).
1. Select the desired power level by pressing the
PowerLevel Selector pad.
Result :
The selected power level will be
displayed in the display window.
2. Select the desired heating time by pressing the
NUMBER pads.
Result :
The selected time is displayed in the
display window.
The maximum time according to each cooking power level can be
referred to in the title "Power Levels and Time Variations" on page 15.
The NUMBER pads will not operate or respond when you press a
cooking time exceeding the maximum value. It is not possible to set a
cooking time for longer than the maximum time allowed on the chosen
program. It is advisable to press CANCEL and to enter a new power
level and cooking time.
13
24/5/2021 11:18:54 AM
24/5/2021 11:18:54 AM

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis