Dmx Operation; Functions In 2-Channel Mode; Functions In 3-Channel Mode - EuroLite LED PARty Spot COB Bedienungsanleitung

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 7 control channels. However, it
can also be switched to a mode with 2, 3, 4 or 5 channels if different functions are required. To be able to operate
the device with a DMX controller, the DMX starting address must be set. The starting address depends upon which
DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until DMX is indicated in the display. Confirm with the ENTER button.
2 The display indicates 2 CH (2 DMX channels), 3 CH (3 DMX channels), 4 CH (4 DMX channels), 5 CH (5 DMX
channels) or 7 CH (7 DMX channels). Use the buttons UP and DOWN to select the desired DMX channel
mode. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address d. Use the buttons UP and DOWN to set
the address. Confirm with the ENTER button.
4 A dot will flash when DMX signals are being received. If no control signals are available, the dot will not flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX chain. If several devices are defined to the same address,
they will work synchronously.

Functions in 2-channel mode

Channel
1
Master Dimmer
2
Color presets

Functions in 3-channel mode

Channel
1
2
3

DMX OPERATION

Value
000 – 255 Increasing brightness 0 – 100 %
000 - 009 No function
010 - 019 Red
020 - 029 Green
030 - 039 Blue
040 - 049 Yellow
050 - 059 Magenta
060 - 069 Cyan
070 - 079 Dark orange
080 - 089 Green yellow
090 - 099 Salmon
100 - 109 Turquoise
110 - 119 Light Green
120 - 129 Orange
130 - 139 Lavender
140 - 149 Light blue
150 - 159 Dark blue
160 - 255 Pink
Value
000 – 255 Intensity red (0 – 100%)
000 – 255 Intensity green (0 – 100%)
000 – 255 Intensity blue (0 – 100%)
Function
Function
28 • EN