Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Safety Notices - Scheppach CSP41 Original Bedienungsanleitung

Benzinmotor - kettensäge
Vorschau ausblenden Andere Handbücher für CSP41:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Intended use

The chain is designed exclusively for sawing wood.
You may only fell trees if you have received the ap-
propriate training. The manufacturer cannot be held
liable for damage caused by improper or incorrect
usage.
Do not operate a chainsaw whilst working in a tree.
The machine is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of mis-
use. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses
or for equivalent purposes.
The operating instructions as supplied by the manu-
facturer must be followed at all times to ensure that the
equipment is used properly. Any use which is not ex-
pressly permitted in the manual may result in damage
to the equipment and place the user in serious danger.
Observe the restrictions in the safety instructions.
m DANGER! Cut only wood with this chainsaw. Due
to the high risk of physical injury to the user, the equip-
ment must not be used for purposes which it was not
intended. For example do not use the chainsaw for cut-
ting plastic, masonry, or non-wood building materials.
For safety reasons, the equipment is not allowed to be
used as a drive unit for other tools of any kind.
Non-permitted users:
Persons who are not familiar with the operating manu-
al, children, young people under the age of 16 as well
as persons under the influence of alcohol, drugs or
medication do not operate the unit.

5. Safety notices

In this user manual, we have marked sections con-
cerning your safety with this sign: m
The user manual also contains other important text
marked with the word "CAUTION!"
m CAUTION!
When using machines, safety measures must be
complied with in order to prevent injury and dam-
age. Therefore, carefully read this operating manual/
these safety notices. If you hand over the machine to
others, please also pass on this manual/these safe-
ty notices. We are not liable for accidents or dam-
age caused by non-compliance with this manual and
these safety notices.
38 | GB
m DANGER
If this instruction is not complied with, there is a con-
siderable danger to life or the risk of life-threatening
injuries.
m WARNING
If this instruction is not complied with, there is a dan-
ger to life or the risk of severe injuries.
m CAUTION
If this instruction is not complied with, there is a slight
to medium risk of injury.
m NOTICE
If this instruction is not complied with, there is a dan-
ger of damaging the motor or other objects.
5.1 General safety notices
m CAUTION!: When working with tools that use fu-
el, the following basic rules must be followed in order
to minimise the risk of physical injury and/or damage
to the machine.
Read these notices before using the saw, and store
them safely.
1. Do not use the saw when you are tired, ill or un-
der the influence of alcohol and/or drugs.
2. Be careful when handling fuel. Use the saw at a
distance of at least 3m from the fuel filling location.
3. Start cutting only when the working environment
has been tidied, when you have established se-
cure footing and planned an escape route from
the falling tree.
4. Before starting the chainsaw, make sure it is not
in contact with any objects.
5. Carry the chainsaw only when the motor has
stopped running, the blade cover is on the chain
bar and the exhaust is facing away from you.
6. Do not start a chainsaw that is damaged, incor-
rectly set up or assembled incompletely or loose-
ly. Ensure that the chainsaw stops when the chain
brake is activated.
7. Turn off the motor before putting the chainsaw down.
8. When cutting small bushes and saplings, be par-
ticularly careful because the thin branches can
become caught in the saw and be ejected to-
wards you or unbalance you.
9. When cutting a branch under tension, be aware
of potential kickback when the tension is sudden-
ly released.
10. Ensure that handles are dry, clean and free from
oil or fuel.
11. Do not cut trees with this chainsaw unless you
have the relevant training.
www.scheppach.com

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5910119917

Inhaltsverzeichnis