Technical data
Voltage: 400 V 3N ~ 50 Hz
Power consumption: 6,0; 8,0; 9,0; 12,0 kW accor-
ding to model
Vaporicer: 1,5 kW
Hight: 1000 mm
Width: 1120 mm
Depth: 200 mm
Stray current: max. 0,75 mA per kW heating
capacity
Sauna oven for use in family sauna
Enclosed in the supplier's pack:
1 sauna oven
3 supplier's packs
1 sauna stones unit separately in cloth bag
With this sauna heater you can choose either
the usual Finnish sauna or the different ways of
using the warm air bath, the ciimatic bath, the
gentle steam bath or herbal bath.
The sauna oven is intended for a connection
voltage of 400 V 3N ~ via a sauna controller.
Contradictory to the specifications concerning
the mounting of the sensor of your sauna control
unit, the heater sensor is not mounted centrically
above the sauna heater but, as shown in the
diagram.
26
Minimum clearances
The minimum height of the sauna cabin must
be 1.90 m on the inside.
When assembling the sauna oven, attention
must be paid to the fact that the vertical distance
between the upper edge of the oven and the
sauna roof must be at least 90 cm, and the hori-
zontal (lateral) distance between the oven and
the booth wall at least 7cm
The distance between the oven protective gril-
le and the sauna bench or other combustible
materials must be at least 2 cm from the oven.
The provided safety grate has to be installed abo-
ve the oven at the upper edge of the partition
to the rear wall.
jects do not fall onto the heater unintentionally.
200
70
Fig. 1
* with cabins measuring up to 2 x 2 m
Dimensions in mm
** with larger cabins
190*
390**
200
Fresh
air
Fig. 2
EN
This is to take care, that ob-
200
heater sensor
Heater guard
190*
heater sensor
390**
220
200
Heater guard
Fresh
air
70
Fig. 1a
Fig. 2a