Herunterladen Inhalt Inhalt Diese Seite drucken

General Safety Information For The Wet/Dry Vacuum Cleaner; This Is How To Avoid Accidents And Injuries From An Electric Shock - Parkside PWD 20 A1 Originalbetriebsanleitung

Nass-/trockensauger
Vorschau ausblenden Andere Handbücher für PWD 20 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

longer contains any embers.
This can be determined by
combing the ashes with a
metal tool before using the
device. There will no longer
be noticeable heat radiating
from the cold ash.
Protection class II
(double insulation)
Plug for indoor use only
Producer
Imported for GB market by:
Lidl Great Britain Ltd.
Lidl House,
14 Kingston Road
Surbiton, KT5 9NU
Pictograms regarding the
use of nozzles and fi lters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth
surfaces and hard fl oor sur-
faces.
Nozzle to vacuum dust and
dirt from joints and cracks.
Filter to vacuum liquids.
Filter not suitable to vacuum
liquids.
Filter to vacuum dry dirt from
the house, garage and work-
shop.
Filter to vacuum fi ne dust e.g.
stone dust or wood dust.
GB
General safety
information for the wet/
dry vacuum cleaner
WARNING! Electric shock -
observe the following basic safety
measures:
This is how to avoid acci-
dents and injuries:
• Never leave the device unat-
tended at the workplace when it
is ready for use.
• Do not allow the vacuum to
come into contact with people
or animals.
• While in operation, never aim
the suction hose and nozzles at
yourself or other people; par-
ticularly not eyes or ears. There
is a risk of injury.
• Do not vacuum hot, glowing,
fl ammable, explosive or hazard-
ous substances. These include
hot ashes, petrol, solvents, acids
or alkalis amongst others. Risk
of fi re and injury.
• The nozzles and suction hose
must not be at the same height
as your head while working.
There is a risk of injury.
This is how to avoid acci-
dents and injuries from an
electric shock:
• Check the power line and exten-
sion cable for damage and age-
ing prior to each use. Do not
use the appliance if the cable is
damaged or worn.
• Make sure that the rated voltage
matches the details on the type
plate.
• Connect the appliance to a
IE
NI
CY
7

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis