Safety Instructions - Nuova Simonelli pronto bar Gebrauchsanleitung

EN
2.

SAFETY INSTRUCTIONS

This book is an integral and essential part
of the product and must be given to the
user. Read this book carefully. It provides
important information concerning safety
of installation, use and maintenance. Save
it carefully for future reference.
After unpacking, make sure the appliance
is complete. In case of doubts, do not
use the appliance, but consult a qualified
technician. Packaging items which are
potentially dangerous (plastic bags, poly-
styrene foam, nails, etc.) must be kept
out of children's reach and must not be
disposed of in the environment.
RISK OF POLLUTION
The machine is can be installed in staff
kitchen areas in shops, offices and other
working environments, farm houses by
clients in hotels, motels and other resi-
dential type environments bed and brea-
kfast type environments.
Before connecting the appliance make sure
the rating plate data correspond with the
mains. The nameplate is located on the
back of the machine, on the left-hand side
at the bottom. The appliance must be instal-
led by qualified technicians in accordance
with current standards and manufacturer's
instructions.
The manufacturer is not liable for any damage
caused due to failure to ground the system.
For the electrical safety of the appliance, it is
necessary to equip the system with the pro-
per grounding. This must be carried out by
a qualified electrician who must ensure that
the electric power of the system is sufficient
to absorb the maximum power input stated
on the plate.
In particular you must ensure that the
size of the wiring cables is sufficient to
absorb power input.
The use of adapters, multiple sockets or
extensions is strictly forbidden. If they
prove necessary, call a fully qualified
electrician.
When installing the device, it is necessa-
ry to use the parts and materials supplied
with the device itself. Should it be neces-
sary to use other parts, the installation
engineer needs to check their suitability
for use in contact with water for human
consumption.
Fig. 3
This machine must be installed according
to the applicable federal, state, and local
standards (codes) in force with regard
to plumbing systems including backflow
prevention devices. For this reason, the
plumbing connections must be carried
out by a qualified technician.
The device needs to be supplied with
water that is suitable for human consum-
ption and compliant with the regulations
in force in the place of installation. The
installation engineer needs confirmation
from the owner/manager of the system
that the water complies with the require-
ments and standards stated above.
This appliance must only be used as
described in this handbook. The manu-
facturer shall not be liable for any damage
caused due to improper, incorrect and
unreasonable use.
Fig. 4
37