Change Password; Water Filter - Nuova Simonelli pronto bar Gebrauchsanleitung

EN
FRIDAY 13:07
Press ENTER to confirm the selection and set
an hour and then the day.
Press ENTER to confirm and to quit the sub-
menu.
4.13 GROUP SETTING 1
Pressing the ENTER
be entered. The number of ENCODER impulses is
programmed because the infusion chamber reaches
the stand-by position.
The keys increase/decrease the number
of ENCODER impulses.
Press ENTER to confirm settings.
to quit the submenu.
NOTE: It is recommended to vary the setting only in
the case in which the original reduced gear is substi-
tuted for a different type.
4.14 GROUP SETTING 2
Pressing the ENTER
be entered.
The number of ENCODER impulses is programmed
because the infusion chamber reaches the upper
position (chamber closed).
The keys increase/decrease the number
of ENCODER impulses.
Press ENTER to confirm settings.
to quit the submenu.

4.15 WATER FILTER

It's possible to enter the submenu by pressing the
ENTER key.
You program here the number of litres of water
delivered and necessary for the "water filter cleaning"
message to appear.
The keys which increase/decrease the
number of litres of water delivered for the "water filter
key, the sub-menu can
Press RESET
key, the sub-menu can
Press RESET
cleaning" message to appear.
Press ENTER to confirm settings.
to quit the submenu.
4.16 DECALCIFICATION
(Prontobar version with Tank only)

4.17 CHANGE PASSWORD?

It is possible to set a new password to access the
programmable functions in technical mode.
Pressing ENTER it is possible to enter the sub
menu.
Enter the old password:
OLD PASSWORD XXXX
Enter the new password using a combination of 4 keys:
NEW PASSWORD XXXX
Confirm the password set previously:
CONFIRM PASSWORD XXXX
5. EXIT
Pressing ENTER
set during the programming stage in the machine's
memory. Pressing RESET
the programming mode without saving.
Press RESET
is possible to store all data
it is possible to quit
53