Display Elements And Symbols - VOLTCRAFT VC891 Bedienungsanleitung

10 Display elements and symbols

The following symbols and letters appear on the device/display. Other symbols may
appear on the display (display test), but these have no function.
True RMS True effective measurement
Δ Delta symbol for relative measurement (= reference measure-
ment).
M Mega symbol (exp. 6)
k Kilo symbol (exp. 3)
Ω Ohm (unit of electrical resistance)
Hz Hertz (unit of frequency)
n Nano symbol (exp. -9)
µ Micro symbol (exp. -6)
m Milli symbol (exp. -3)
V Volt (unit of electrical voltage)
A Ampere (unit of electrical current)
F Farad (unit of electrical capacity)
°C/°F Degrees Celsius / Degrees Fahrenheit (unit of temperature)
REL Relative measurement button (= reference measurement)
SELECT Switches to sub-mode
SETUP Setup menu
BLE Enable Bluetooth™ interface
HOLD Freezes the current measurement
OL Overload; the measurement range was exceeded
Check inPut Warning message "Wrong measurement socket selection".
OFF Move to this position to turn the multimeter off
Diode test symbol
Acoustic continuity tester symbol
Capacity measuring range symbol
Alternating current symbol
63