Herunterladen Inhalt Inhalt Diese Seite drucken

Scope Of Delivery; Description Of The Unit; Symbols On The Device - Kärcher IVM 40/24-2 H ACD Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für IVM 40/24-2 H ACD:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Information on accessories and spare parts
can be found at www.kaercher.com.
Note
No accessories are included in the scope of
delivery. The accessories must be ordered
separately depending on the application.

Scope of delivery

Check the contents for completeness when
unpacking. In the event of shipping dam-
age, please notify your dealer.

Description of the unit

For the illustrations, refer to the graphics
page
Illustration A
Steering roller with parking brake
1
Dirt receptacle
2
Sealing plug on the dirt receptacle
3
Sealing plug on the filter ring
4
Pressure gauge
5
Filter dedusting
6
Spacer lock
7
Suction turbine power switch
8
Suction head
9
filter
10
Sealing ring
11
Filter hold-down device
12
Type plate
13
Carrying handle
14
Mains cable
15
Cable clips
16
Spacer
17
Bow handle of the dirt receptacle
18
Push handle
19
Suction head lock
20
Filter ring
21
Suction hose port on the filter ring
22
Suction hose port on the dirt receptacle
23
Chassis
24

Symbols on the device

The device is suitable for vacuuming dusts
up to dust class H.
WARNING: This device contains dusts that
are harmful to your health. Emptying and
maintenance, including removal of the dust
bag, may only be performed by appropri-
ately trained personnel wearing suitable
personal protective equipment. Do not
switch on until the entire filter system has
been installed and the volume flow control
functionality has been checked.
The unit is suitable for vacuuming combus-
tible dusts, installation outside zone 22.
WARNING: This unit must not be placed in
any zone 22. If a zone 22 is present, an EX-
device must be used.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
chapter Dedusting the main filter) or re-
placed (see chapter Replacing the main fil-
ter). The various different hose cross-
sections allow adaptation to the various dif-
ferent connection cross-sections of the ac-
cessories.
Dust bag
(Order no. 9.989-606.0)
Safety filter bag
(Order no. 6.904-420.0)
English
23

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ivm 40/24-2 h

Inhaltsverzeichnis