Proper Use; Environmental Protection; Scope Of Delivery; Description Of The Appliance - Kärcher K 2 Battery Bedienungsanleitung

Proper use

This high pressure cleaner is designed for domestic use
only.
– for cleaning machines, vehicles, buildings, tools,
facades, terraces, gardening tools, etc. by means
of a high-pressure water jet (if necessary, with ad-
ditional cleaning agents).
– with accessories, replacement parts and cleaning
agents approved by KÄRCHER. Please observe
the information accompanying the cleaning agents.

Environmental protection

Old appliances contain valuable recyclable mate-
rials that should be recycled properly. Batteries
and accumulators contain substances that must
not enter the environment. Please dispose of old
devices and batteries or accumulators in an envi-
ronmentally friendly way.
Electrical and electronic devices often contain
components which could potentially pose a dan-
ger to human health and the environment if han-
dled or disposed of incorrectly. However, these
components are necessary for the proper opera-
tion of the device. Devices marked with this sym-
bol must not be disposed of with regular house-
hold rubbish.
The packaging material can be recycled. Please
arrange for the environmentally appropriate dis-
posal of the packaging.
Cleaning operations which produce oily waste wa-
ter, e.g. engine washes, underbody washes, may
only be carried out using washing stations
equipped with an oil separator.
Work with detergents must only be performed on
liquid-tight work surfaces with a connection to the
sewer system. Do not let release detergent into
waters or earth.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH

Scope of delivery

The scope of delivery of your appliance is illustrated on
the packaging. Check the contents of the appliance for
completeness when unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.

Description of the Appliance

These operating instructions describe the maximum
equipment. Depending on the model, there are differ-
ences in the scopes of delivery (see packaging).
See fold-out page 3 for illustrations
1 Nameplate
2 High pressure connection
3 Appliance switch „0/OFF" / „I/ON"
4 Battery pack release
5 Battery compartment
6 Carrying handle
7 Storage for trigger gun
8 Storage for spray lance
9 Detergent suction hose (with sieve)
10 Coupling element for water connection
11 Water connection with integrated sieve
12 Trigger gun
13 High-pressure gun display
MIX / STANDARD / BOOST
14 Lock trigger gun
15 Button for detaching the high-pressure hose from
the trigger gun
16 High pressure hose
17 Spray lance with Dirtblaster
Working mode: BOOST
For stubborn dirt (shorter battery run time)
18 Spray lance with high pressure nozzle
Working mode: STANDARD
For normal cleaning tasks (longer battery run time)
* Optional
19 Standard charger Battery Power 36 V
A Battery contacts
B Battery adapter
C Connection cable
D Plug-in power supply
20 Battery pack Battery Power 36/50
A Battery pack display
B Contacts
C Nameplate
D Intake
** Additionally required
21 Fabric-reinforced water hose with commercially
available coupling.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
22 KÄRCHER suction hose SH 5
(order no. 2.643-100.0)
Mount loose parts delivered with appliance prior to start-
up.
See fold-out page 4 for illustrations
Illustration
 Attach the carrying handle.
Illustration
 Screw the coupling element to the water connec-
tion on the appliance.
– 10
EN
Assembly
21