Scope Of Delivery; Description Of The Appliance; Before Startup - Kärcher K 6.685 Bedienungsanleitung

Operation

Scope of delivery

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.

Description of the Appliance

Illustrations on fold-out
pages!
1 Coupling element for
water connection
2 Water connection with integrated sieve
3 Appliance switch "0/OFF"/ „I/ON"
4 High pressure hose
5 Dosage regulator for detergent
6 Storage for trigger gun
7 High-pressure hose drum
8 Transport handle
9 Hand crank for hose drum
10 Accessory net
11 Storage hook for mains connection ca-
ble
12 Mains cable with mains plug
13 Detergent suction hose (with sieve)
14 Wheels
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high pressure hose
from the trigger gun
18 Washing brush
19 Spray lance with Dirtblaster
20 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Before Startup

Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Illustration
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
 Illustration
Install the top storage hook.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
 Illustration
Wind up the high-pressure hose on the
hose drum.
 Illustration
Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
 Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
 Illustration
Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.
Check the secure connection by pulling
on the high pressure hose.
Attach the accessories net
 Illustration
Hook the accessories net into the hooks
shown in the illustration.
- 8
EN 17