General Information; Eec-Declaration Of Conformity; Safety Instructions - Dentaurum Paratherm Gebrauchsanweisung

EN
1 Declaration of conformity

EEC-Declaration of conformity

Dentaurum GmbH & Co. KG
Turnstraße 31
D 75228 Ispringen
hereby declares that the design and construction of the laboratory equipment described below, including
the version marketed by us, comply with the basic regulations governing safety and health as stated in the
EEC guidelines. This declaration will become invalid if the laboratory equipment is modified or altered in
any way without our prior consent.
Description of the unit Surveying, blocking-out and waxing unit
REF 094-270-00
Type Paratherm
Start with unit No. 32-080
EEC guidelines 89/336/EEC
92/031/EEC Modified guideline
73/023/EEC Electrical equipment used within certain
93/068/EEC Modifications of the above guidelines
Applied unified standards EN 55011
EN 50082
EN 61010
Date/manufacturer's signature 14.07.2005
Signatory
6
Electromagnetic compatibility
voltage limits
..........................................................
- p. p. Dipl.-Ing.(FH) K.Merkle -
Production Manager Mechanic

1.1 General information

Thank you for having chosen a Dentaurum unit. Please study these instructions for use carefully so that you
may enjoy the benefits of using this Paratherm unit.
2

Safety instructions

Caution Read through the instructions for installing and operating the unit carefully before
switching it on.
2.1 Disposal
When a Dentaurum product is finally no longer in use the disposal regulations of that particular country
apply. Dentaurum or the dental trade is available to answer questions regarding the correct disposal of any
specific product.
Note:
This symbol indicates, products marked with it should not be disposed off together with garbage
of households. The legislator disallows commercial customers to return electronic waste via muni-
cipial collection points. Further information is available through Dentaurum or the dental trade.
2.2 Delivery
1 Paratherm unit with surveying / blocking-out arm
1 Analyzing rod
1 Graphite holder
10 Replacement graphite markers
4 Undercut gauges 0.25 / 0.35 / 0.50 / 0.75 mm D
2 Thermal blocking-out instruments 0°, 2°
1 Plastic cover
1 Fuse T 0.25 A
1 Instructions for use with EEC-Declaration of conformity
3 Areas of use
Cast partial denture, combination techniques, conical crowns, positioning of snap attachments and
attachments.
A
B
C
E
EN
7