Qualified Personnel - Maschio Gaspardo BISONTE 220 Gebrauch Und Wartung

ENGLISH
Defi nitions:
Below is a list of defi nitions of the main terminology used in this Manual. Read these defi nitions carefully before consulting
the Manual.
• OPERATOR: .........................................The person/s charged with installing, starting up, adjusting, carrying out main-
• DANGER ZONE: ...................................any area inside a/o near a machine in which the presence of an exposed person
• DANGER CONDITION: .........................Any condition in which an operator is exposed to one or several risks.
• RISK: .....................................................A combination of likelihood and seriousness of possible injuries or damage to
• PROTECTIONS ...................................Safety measures consisting in installation of specifi c technical systems (guards
• GUARD: ................................................An element on the machine which is used in a specifi c way to protect the ope-
• EXPOSED PERSON: ............................Any person who happens to be completely or partially in a danger zone.
• USER: ...................................................The user is the person or the organization or the fi rm which has purchased or
• QUALIFIED PERSONNEL: ...................Those persons who have been specially trained and qualifi ed to carry out
• TRAINED PERSONNEL: ......................These are operators that have been informed or trained on the operating tasks
• AUTHORIZED SERVICE CENTER: .....The authorized Service Center is a structure legally authorized by the manufac-
Responsibility
The Manufacturer declines any direct or indirect responsibility in the following cases:
- incorrect machine operation for non-intended uses;
- machine operation by unauthorised operators who have not been trained and do not have a driving license;
- non-performance of scheduled maintenance;
- unauthorised changes or work;
- installation of non-genuine and specifi c spare parts;
- non-observance, either total or partial, of the instructions provided in this manual;
- non-observance, either total or partial, of the instructions provided in this manual;
- failure to apply regulations on safety, hygiene and health at work;
- unscheduled and unpredictable events.
• Minors, illiterates and persons under altered physical or psychological conditions must not be allowed to operate the
machine.
• Operators who do not have a suitable driving license, or who are not properly informed and trained, must not be allowed
to operate the machine.
• The operator must check that the machine operates correctly, and must replace and repair parts subject to wear that
may cause damage.
• The customer should instruct personnel on accident risks, on the operator safety devices provided, on noise emission
risks and on general accident prevention regulations provided for by the international directives and by the law in the
country in which the machines are used.
• In any case, the machine should be used exclusively by skilled operators who will be held to follow scrupulously the
technical and accident-prevention instructions in this manual.
• The Customer is responsible for fi nding and selecting the category of suitable PPE (Personal Protection Equipment).
• The machine features pictograms which the operator must keep in perfect readable conditions. When no more readable,
they must be replaced as instructed by European regulations.
• It is the user's responsibility to check that the machine is operated only in optimum conditions of safety for people, animals
and property.
• Any change made on the machine without authorisation relieves the Manufacturer from any and all responsibility for
damage to objects or injuries to operators or third partiesi.
38 - EN
USE AND MAINTENANCE
tenance, cleaning, repairing or transporting a machine.
constitutes a risk for the safety and health of that person.
the operator's health in a danger condition.
and safety devices) to protect operators against dangers.
rator by means of a physical barrier. Depending on its construction, it can be a
shroud, a cover, a shield, a door, a fence, a guard, a segregation unit, etc.
rented the machine and intends to use it for the purposes it was conceived for.
interventions of maintenance or repair requiring a particular knowledge of the
machine, its functioning, safety measures, methods of intervention - and who
are in a position to recognize the potential dangers when using the machine and
are able to avoid them.
and relating risks.
turer which disposes of personnel specialized and qualifi ed to carry out all the
operations of assistance, maintenance and repair - even of a certain complexity
- found necessary to keep the machine in perfect working order.
ATTENTION
cod. F07011705