Beurer BC 57 Gebrauchsanweisung Seite 32

To clear individual measurements from the relevant
user memory, you must first select a user memory.
• Start individual measurement access.
• Press and hold the memory button M for 5 sec-
onds (depending on the user memory you are in).
• The selected value is deleted. The device briefly
displays CL 00.
• If you would like to delete other values, repeat the
process described above.
You can switch off the device at any time by pressing
the START/STOP button
Transfer via Bluetooth
It is also possible to transfer the measured values saved
on the device to your smartphone via Bluetooth
You will need the "HealthManager" app for this. The app
is available from the App Store.
Proceed as follows to transfer values:
If Bluetooth ® is activated in the settings menu, the data
is transferred automatically after the measurement. The
symbol appears in the top left of the display (see chapter
4 "Preparing the measurement").
.
Smart
®
Smart.
®
32
Step 1: BC 57
Activate Bluetooth ® on your device (see
chapter 4 "Preparing the measurement,
Bluetooth ® ").
Step 2: "HealthManager" app
In the "HealthManager" app, add the BC
57 under "Settings/My devices".
Step 3: BC 57
take a measurement.