Transport - Stihl RE 100.0 PLUS CONTROL Gebrauchsanleitung

English
► Use a splash water protected extension
cord approved for outdoor use.
► Use an extension cord that has the same
characteristics as the connecting cable of
the high-pressure washer,
► We recommend you use a cable drum with
sockets that are at minimum 60 mm above
floor level for this purpose.
WARNING
■ During operation, an incorrect mains voltage
or incorrect mains frequency may result in an
overvoltage in the high-pressure washer. The
high-pressure washer may be damaged.
► Make sure that the mains voltage and the
mains frequency of the power supply match
the data on the rating plate of the high-pres‐
sure washer.
■ If several electric power tools are connected to
a multiple socket, electrical components may
be overloaded during operation. The compo‐
nents may overheat and cause a fire. Persons
may be seriously or fatally injured, and prop‐
erty may be damaged.
► Only ever connect one high-pressure
washer to one socket.
► Do not connect high-pressure washers to
power strips.
■ An incorrectly routed connecting cable or
extension cord may be damaged, and people
may trip over it. People may be injured, and
the connecting cable or extension cord may be
damaged.
► Route the connecting cable and extension
cord so that the water jet does not come
into contact with them.
► Route and mark the connecting cable and
extension cord so that people will not trip
over them.
► Route the connecting cable and extension
cord so that they are not under tension or
tangled.
► Route the connecting cable and extension
cord so that they will not be damaged,
kinked or crushed and will not be chafed.
► Protect the connecting cable and extension
cord from heat, oil and chemicals.
► Lay the connecting cable and extension
cord on a dry surface.
■ The extension cable warms up in operation. If
that heat cannot escape, it may cause a fire.
► If using a cable reel: completely unroll the
cable reel.
32
4.11
■ The pressure washer may topple over or move
18.2.
during transport. Persons may be injured or
property damaged.
► Lock the spray gun trigger.
► Unplug the mains plug of the high-pressure
► Secure the pressure washer using lashing
■ At temperatures below 0° C water can freeze
in the components of the pressure washer.
The pressure washer may be damaged.
► Drain high-pressure hose and spray attach‐
4.12
■ Children are not aware of and cannot assess
the dangers of the pressure washer. Children
can be seriously injured.
► Lock spray gun trigger.
► Unplug the mains plug of the pressure
► Store the pressure washer out of the reach
■ Moisture may cause the electrical contacts on
the pressure washer and metal components to
corrode. The pressure washer may be dam‐
aged.
► Store the pressure washer in a clean, dry
■ At temperatures below 0 °C water may freeze
in components of the pressure washer. The
pressure washer may be damaged.
► Drain high-pressure hose and spray attach‐

Transport

WARNING
► Switch off the high-pressure washer.
washer from the socket.
► Drain the detergent bottle or secure
it so that it cannot topple over and
cannot move.
straps, belts or a net so that it cannot topple
over and cannot move.
ment.
► If the pressure washer cannot be
transported in a frost-proof envi‐
ronment: Protect the pressure
washer using a glycol-based anti‐
freeze.
Storage
WARNING
► Switch off pressure washer.
washer from the socket.
of children.
state.
ment.
4 Safety Precautions
0458-004-9821-B