Range Of Applications; Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL 41.335.01 Originalbetriebsanleitung

6. Operation

Range of applications:

•
The infinitely variable trigger lever allows an
exact dosing of the spray material.
•
The rotating nozzle allows you to adjust the
ratio of material to the volume of air. The ma-
terial is applied directly from the conventional
disposable can.
•
Tip: Check the material/air ratio setting on a
suitable sample (for example carton).
7. Cleaning, maintenance and
ordering of spare parts
Warning! Disconnect the air tool from the com-
pressed air source before cleaning.
Important! Do not fully immerse the tool in sol-
vent.
7.1 Cleaning
•
Clean the nozzle as well if it becomes
clogged unexpectedly or the spray pattern is
poor.
•
We recommend that you clean the appliance
immediately after you use it.
•
Clean the accessories after use with a suitab-
le cleaning agent (observe the instructions on
the working materials).
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_Unterbodenschutzpistole_SPK9.indb 12 Anl_Unterbodenschutzpistole_SPK9.indb 12
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
- 12 -
08.05.2018 13:30:51 08.05.2018 13:30:51