Husqvarna TC 242TX Bedienungsanweisung Seite 14

3. Remove the bolt (A).
B
C
4. Put the full lever shroud (B) in the slots (C).
5. Push the lever (D) through the full lever shroud and
install the bolt (A).
D
6. If it is necessary to adjust the full lever, do the steps
that follow.
a) If the grass is heavy or wet, remove the bolt and
put the full lever in the fully retracted position.
Install the bolt again.
b) If the grass is light or dry, remove the bolt and
put the full lever in the fully extended position.
Install the bolt again.
To install the presence lever for the
grass catcher
1. Stop the engine and engage the parking brake.
14
2. Put the presence lever (A) into the slots in the
backplate.
A
3. Install the screw (B) and the nut (C).
To install the tow hitch
A
A
1. Remove the 3 screws (A) from the tow hitch (B).
2. Put the tow hitch in the slot (C) in the backplate (D).
3. Install the 3 screws through backplate and tighten
them.
To adjust the seat
1. Lift the seat up and remove the seat adjustment
knob (A).
C
A
C
D
1923 - 005 - 13.10.2022
B
B