Helpful Information; Remote Control Fails To Function; When There Is A Power Failure; Thunder And Lightning - Panasonic CS-G95KE Bedienungsanleitung

Helpful Information

Remote control fails to function

If the remote control fails to function or has been
misplaced, carry out auto operation. Auto operation
settings are automatic; the temperature cannot be
adjusted.
Hold the two panel openers of the front
panel and pull. (Replace after operation
starts.)

When there is a power failure

Power failure during operation
Auto Restart Control
If there is a power failure, operation will be
automatically restarted under the previous
operation mode and airflow direction when the
power is resumed as the operation is not
stopped by remote control.
When the operation restarts, the outdoor unit
will operate only after 3~4 minutes.

Thunder and lightning

This air conditioner is equipped with a built-in surge protective device. However, in order
to further protect your air conditioner from being damaged by abnormally strong lightning
activity, you may switch off the main power supply and unplug from power socket.

Voltage fluctuation

The outdoor unit stops operation frequently due to a fluctuation in the voltage. Consult your dealer.
1 Turn the Power Supply to ON
Press the Auto Operation button once.
2
The POWER LED blinks until
the operation mode is selected.
To cancel Auto
Operation
Press the Auto Operation
button again (POWER LED
lights off).
Power failure after the Timer has
been set
The Timer setting is cancelled. (Main unit's Timer
LED is extinguished.) Once power is restored,
reset the Timer.
(Ex) Power failure after the ON-Timer has been set.
TIMER
1
1 ON OFF
2
2
3
SET
CANCEL
(Indoor unit's Timer LED lights
up.)
AUTO OFF/ON
Press ON Button
Press SET Button
25